Anti Static Ioniztion Bars
Static bars, also known as,
static eliminators or
anti static bars,
are a very cost effective
way to remove static electricity on a web of material in a plastics,
paper, glass, textile, and or film converting applications. All of these static bars are
bi-polar ionization generators (produce both positive and negative ionization) to remove static electricity. Remember - A clean static
bar is more effective.
Model 1100 High Output Static Bar with
High output ( also known as hot) static bars are
a reliable, efficient and cost effective choice for
a static bar.
1" x 1" x 5"
25 mm x 25 mm x effective length + 127 mm
Model 11 High Output Static Bar
(same as above without Ion-Lite technology)
1" x 1" x 3"
25 mm x 25 mm x effective length + 76mm
Model 21 Shockless Static Bar
static bars are usually smaller that their high output counter
parts. They also have the advantage of being "shockless". This
is a very good choice if the operator has to work in close proximity
to the static bar.
0.75" x effective length +3"
16 mm x 20 mm x effective length + 76 mm
The Model 4000 is an advanced technology static
bar for long distance and high speed applications. The Model 4000
has a high output, a great effective distance and a more rigid
construction than other static bars. It is a cost effective
solution for demanding static control applications.
See our DC systems for
the highest speed webs or charging applications
Part number codes for Static Bars
The XXX in the static bar part number identifies
the overall length of the bar. For example a Model 11 Static Bar
with a 12" effective
length and a 15" overall length would have a part number
Model 21, Model 11 and Model 4000 static bars are effective
length plus 3" for over all length.
Model 1100 bar is effective length plus
5 " for over all length.
Optional features static bars:
- air boost to increase effective range
bar to increase ionization output for a given length of bar
- Custom cable lengths
Static bars from ElectroStatics, Inc come in four basic models with a variety
of options, such as air boost, can solve all static electricity related
offers the broadest and most cost effective line of static neutralizing
bars equipment to control electrostatic charges and increase efficiency
and productivity. Air boost option increases ionization range and assists
in contamination control.
Static bars are the most cost effective method to control static electricity
on webs of material.
Power Supplies for Static Bars
Static Bars, Models 11, 1100 require a
4 KV output power unit, Model T1246SL, PN
120V, 50/60HZ or T-2246SL,
PN 220V, 50/60HZ
Static Bars Model 21 & Model 4000 require
a 7KV output power unit, Model T-1276SL
, 120V or 50/60HZ or T-2276SL
One (1) power supply can support 2 static bars.
Approximate dimensions of AC Power supplies
6" x 3.5" x 3.70" (153 mm x 89 mm x 94 mm )
Here is our
index of our other static eliminator products.